Electronic Integrated System Mechanic (Military Requirement)


Vacancy ID: 1015570   Announcement Number: SEU-SR-Elec Int Sys Mech   USAJOBS Control Number: 357639200

Social Security Number

Enter your Social Security Number in the space indicated.

Your Social Security Number is requested under the authority of Executive Order 9397 to uniquely identify your records from those of other applicants who may have the same name. Failure to provide your Social Security Number on your application materials will result in your application not being processed.


Vacancy Identification Number

The Vacancy Identification Number is: 1015570


1. Title of Job

Electronic Integrated System Mechanic (Military Requirement)


2. Biographic Data

3. E-Mail Address

Applicants will only be notified of their rating electronically. In order to receive your Notice of Rating, you must apply using Option A, Application Manager.  

 


4. Work Information

If you are applying by the OPM Form 1203-FX, leave this section blank.

5. Employment Availability

6. Citizenship

Are you a citizen of the United States?
7. Background Information

If you are applying by the OPM Form 1203-FX, leave this section blank.

8. Other Information

If you are applying by the OPM Form 1203-FX, leave this section blank.

9. Languages

If you are applying by the OPM Form 1203-FX, leave this section blank.

10. Lowest Grade

If not already selected, please indicate your lowest acceptable pay plan, grade level, or pay band:


12

11. Miscellaneous Information

If you are applying by the OPM Form 1203-FX, leave this section blank.

12. Special Knowledge

If you are applying by the OPM Form 1203-FX, leave this section blank.

13. Test Location

If you are applying by the OPM Form 1203-FX, leave this section blank.

14. Veteran Preference Claim

15. Dates of Active Duty - Military Service

These dates are required if you have claimed Veterans' Preference unless you have claimed derived Preference (i.e., widows, spouse, etc.)

Please use this format: (MM/DD/YYYY)


16. Availability Date

If other than immediate, please indicate the date that you are available to begin working: (MM/DD/YYYY)


17. Service Computation Date

If you are applying by the OPM Form 1203-FX, leave this section blank.

18. Other Date Information

If you are applying by the OPM Form 1203-FX, leave this section blank.

19. Job Preference

If you are applying by the OPM Form 1203-FX, leave this section blank.

20. Occupational Specialties

The occupational specialty will be selected for you if there is only one, otherwise, select/enter at least one occupational specialty code for this position.
The specialty code for this position is:


001 Electronic Integrated Systems Mechanic

21. Geographic Availability

The geographic location code will be selected for you if there is only one, otherwise, select/enter at least one geographic location in which you are interested and willing to accept employment.


012025101 Maxwell AFB, AL
020710020 Elmendorf AFB, AK
040127019 Davis Monthan AFB, AZ
040274013 Luke AFB, AZ
052321119 Little Rock AFB, AR
060278115 Beale AFB, CA
062075065 March AFB, CA
063883095 Travis AFB, CA
080266005 Buckley AFB, CO
081956041 Peterson AFB, CO
082234041 Schriever AFB, CO
100132001 Dover AFB, DE
120935091 Eglin AFB, FL
121441086 Homestead AFB, FL
121462091 Hurlburt Field, FL
121865057 MacDill AFB, FL
122465009 Patrick AFB, FL
123025005 Tyndall AFB, FL
131715067 Dobbins AFB, GA
133745185 Moody AFB, GA
134715153 Robins AFB, GA
151885003 Hickam AFB, HI
177835163 Scott AFB, IL
181972103 Grissom AFB, IN
203379173 McConnell AFB, KS
220115015 Barksdale AFB, LA
240025033 Andrews AFB, MD
250478017 Hanscom AFB, MA
251445013 Westover Air Reserve Base, MA
274760053 Minneapolis, MN
280545087 Columbus AFB, MS
281235047 Keesler AFB, MS
298355101 Whiteman AFB, MO
313595153 Offutt AFB, NE
320055003 Creech AFB, NV
320145003 Nellis AFB, NV
341778005 McGuire AFB, NJ
350415035 Holloman AFB, NM
364210063 Niagara Falls, NY
373697051 Pope AFB, NC
374155191 Seymour Johnson AFB, NC
399165057 Wright-Patterson AFB, OH
399230099 Youngstown, OH
400122065 Altus AFB, OK
404725109 Tinker AFB, OK
404845047 Vance AFB, OK
411650005 Portland, OR
426600003 Pittsburgh, PA
450411019 Charleston AFB, SC
480905029 Brooks AFB, TX
481195439 Carswell AFB, TX
482017441 Dyess AFB, TX
482450439 Fort Worth, TX
483765029 Lackland AFB, TX
485635029 Randolph AFB, TX
486345485 Sheppard AFB, TX
490695011 Hill AFB, UT
511404650 Langley AFB, VA
531225053 McChord AFB, WA
GQ0200000 Andersen Air Base, GU

22. Transition Assistance Plan

If you are applying by the OPM Form 1203-FX, leave this section blank.

23. Job Related Experience

If you are applying by the OPM Form 1203-FX, leave this section blank.

24. Personal Background Information

If you are applying by the OPM Form 1203-FX, leave this section blank.

25. Occupational/Assessment Questions:

The following section is used to determine your availability for an Air Reserve Technician (ART) position. Individuals selected for an Air Reserve Technician (ART) position must meet and maintain ART requirements.  Applicants for ART positions must currently be a member of the Air Force Reserve or willing and eligible to join. Retired military personnel are not eligible for Air Reserve Technician positions unless currently assigned in an active Air Force Reserve position or a waiver has been obtained prior to self-nomination.  Applicants must document on the resume, possession of a waiver.  The Air Force has final responsibility for determining eligibility for admission to the Air Force Reserve

1.

Are you willing and eligible to accept an ART position with the understanding this position requires an active duty military obligation as a condition of employment?

A. Yes
B. No

This section will be used to determine if you possess the experience or training needed to qualify for an Electronic Integrated Systems Mechanic, WG-2610-12. Respond to the item below. FAILURE TO RESPOND TO THIS ITEM WILL RESULT IN AN INELIGIBLE RATING.

2. From the descriptions below, choose the one letter beside the statement that best describes the highest level of experience or training that you possess and that demonstrates your ability to perform the duties of an Electronic Integrated Systems Mechanic, WG-2610-12 level, without more than normal supervision. SELECT ONLY ONE LETTER. NOTE: YOUR RESUME MUST SUPPORT THE RESPONSE YOU SELECT.

A. I have no experience or training as an Electronic Integrated Mechanic or I have only completed vocational training.
B. I have limited experience performing simple Electronic Integrated Mechanic tasks to include work involved in rebuilding, overhauling, installing, troubleshooting, repairing, modifying, calibrating, aligning, and maintaining integrated electronic systems, i.e., where the output of a number of sensor subsystems is integrated in a logic subsystem and the resultant used to modify the operation of the total system (e.g., fire control, flight/landing control, automatic test equipment, flight simulators, combing navigation, and electronic warfare or multiple integrated electronic systems composed of several of these systems which are closely interrelated and interdependent) under close supervision.
C. I have experience performing the work of an Electronic Integrated Mechanic under close supervision. I am given assignments in the form of work orders with a general discussion of the work to be performed, including such things as planned completion dates and modification schedules. I am able to take action in solving problems under close supervision. My work is reviewed for compliance with acceptable trade practices.
D. I have experience performing the work of an Electronic Integrated Mechanic independently and under limited supervision. My work is assigned in broad general instructions covering the scope of the task assigned.
E. I have experience performing the full range of duties of an Electronic Integrated Systems Mechanic or I am consulted by other workers because of my expertise and ability. I am considered to be a highly qualified expert. My work is reviewed in terms of overall results achieved, i.e., compliance of the finished product with durability and accuracy requirements.

For each task in the following group, choose the statement from the list below that best describes your experience and/or training.

A- I have not had training or experience in performing this task.
B- I have had training in performing the task, but have not yet performed it on the job.
C- I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.
D- I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.
E- I am considered an expert in performing this task. I have supervised performance of this task or I am normally the person who is consulted by other workers to assist them in doing this task because of my expertise.

3. Use a variety of hand tools such as screwdrivers, drills, wrenches, soldering irons, and microsoldering units.

4. Use and maintain precision measurement tools and test equipment, such as O-scopes, pulse generators, power supplies, resistance decades, electrostatic field meters, digital/analog multimeters, precision measurement tools and test equipment, gas leak detectors, resistivity meter, electronic control test set, explosive set, circuitry test set, ESD meter, VOM meters, micrometers, torque wrenches, soldering irons, and other trade tools and equipment.

5. Set up and operate software controlled automated test stations such as the Electrical Electronic Equipment Test Set and Infrared Detecting Test Set Group and Teradyne Test station to run established and new diagnostic programs in various test modes to test and troubleshoot multi-system complexes.

6. Install integrated ground or airborne electronics systems such as fire control, ballistic missile control, missile guidance, air traffic control, automatic test equipment, dead reckoning navigation or bombing-navigation systems.

7. Maintain and repair integrated ground or airborne electronics systems such as fire control, ballistic missile control, missile guidance, air traffic control, automatic test equipment, dead reckoning navigation or bombing-navigation systems.

8. Align and calibrate integrated ground or airborne electronics systems such as fire control, ballistic missile control, missile guidance, air traffic control, automatic test equipment, dead reckoning navigation or bombing-navigation systems.

9. Perform work on systems composed of a number of individual subsystems (i.e., radar, computers, gyro or inertia sensing units, launching control units, etc.) which are linked together and interrelated so that their combined functions accomplish a specific objective and comprise a complete integrated system.

10. Analyze indications obtained during operation, relate them to the technical data available on the individual subsystems and the various data and function exchanges between the subsystems.

11. Use algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system.

12. Apply technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon multi-system operation and on the various maintenance and alignment procedures.

13. Set up and operate software controlled automated test equipment to run established programs in various test modes to test and troubleshoot integrated systems.

14. Trace the effect of a change in one subsystem to other subsystems and determines which controls and devices must be changed or adjusted to compensate.

15. Perform final functional and operational tests of systems after repairs or modifications.

16. Troubleshoot integrated ground or airborne electronics systems such as fire control, ballistic missile control, missile guidance, air traffic control, automatic test equipment, dead reckoning navigation or bombing-navigation systems.

17. Interpret complex drawings, specifications, and schematics of complete integrated systems to recognize the functions and interconnections of subsystems to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate.

18. Interpret drawings for multi-systme complexes such as the complete electronic package for an aircraft to include numerous interconnectins of signal paths.

19. Follow drawings for integrated electronic systems such as a radar navigation system, digital and analog switching units or secure communication systems.

This section is used to certify the accuracy of your application package. Please respond 'yes' or 'no' to the following statement.  Please take this opportunity to review your ratings to ensure their accuracy.  By agreeing to the statement below, you are confirming that you:  Understand this warning; have reviewed your responses to this questionnaire for accuracy; and verified that your responses accurately describe your current level of experience and capability.

20.

I certify that my responses to this questionnaire and the resume and documents provided in my application are true and accurate to the best of my knowledge. NOTE: Failure to certify will render you ineligible for consideration.

A. Yes, I verify that all of my responses to this questionnaire are true and accurate. I accept that if my supporting documentation and/or later steps in the selection process do not support one or more of my responses to the questionnaire that my application may be rated lower and/or I may be removed from further consideration.
B. No, I do not accept this agreement and/or I no longer wish to be considered for this position.